Maytag Dryer Code L2 or F4E4: Low or No Line Voltage
L2 and F4E4 are two displays for the same condition on a Maytag electric or gas dryer with an electronic control: low or no line voltage. The dryer is telling you that the home power supply…
- Code
- L2 or F4E4
- Appliance
- Dryer
- Brand
- Maytag
- Warranty
- 30-day workmanship
What L2 or F4E4 means
L2 and F4E4 are two displays for the same condition on a Maytag electric or gas dryer with an electronic control: low or no line voltage. The dryer is telling you that the home power supply may be keeping the heater from turning on. The drum keeps running and clothes tumble but stay cold or damp. Touching any pad clears the code. Older dryers like this remain common around Houston, and we check both the dryer and the supply.
Common causes of L2 or F4E4
- One leg of the home power supply missing at the dryer
- Tripped or weak circuit breaker feeding the dryer
- Power cord, outlet or terminal connection
- Heater circuit not receiving full voltage
1. Touch any pad to clear the code and return to the time remaining. 2. Look at the home breaker panel. An electric dryer uses a paired breaker, so check that both halves are on and not tripped. 3. Reset a tripped breaker once by switching it fully off and on. 4. Run a timed dry cycle and see whether the clothes get hot. 5. Do not open the outlet or the dryer.
- If both breaker halves are on and the code returns, the missing voltage may be in the outlet, the cord or the dryer, and only a meter test shows where.
- We test the supply at the dryer first, so we know whether the problem is in the house wiring or the machine.
- You approve a written price before work, and house wiring beyond the dryer is a job for an electrician.
Other Dryer codes
Why does the dryer run but not heat?
With low or no line voltage, the motor side can still work while the heater cannot. The drum tumbles, but the air stays cold, and L2 or F4E4 shows.
Are L2 and F4E4 different?
No. They describe the same low or no line voltage condition. Which one you see depends on how your model displays the message, and the checks are the same.
Can I just reset the breaker?
Yes, once. Switch it fully off and on and run a timed cycle. If the code returns, stop and call us, because repeated tripping can mean a wiring or heating problem.
Still seeing L2 or F4E4?
A technician diagnoses it on site and gives you the price in writing before any work starts.