Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Dryer

Maytag Dryer Code F1E1: Reset Only

F1E1 on a Maytag electric or gas dryer with an electronic control is shown with no stated cause and a power reset as the only step. The dryer's control reports an internal condition and wants a…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F1E1
Appliance
Dryer
Brand
Maytag
Warranty
30-day workmanship

What F1E1 means

F1E1 on a Maytag electric or gas dryer with an electronic control is shown with no stated cause and a power reset as the only step. The dryer's control reports an internal condition and wants a restart. In the display you see F1E1, and the dryer may not start or may stop during a cycle. Since no cause is named, the reset is the useful move, and a returning code is the sign that deeper testing is needed.

Common causes of F1E1

  • Control reporting a condition a restart may clear
  • Power supply to the dryer unsteady
  • Connection in the control area
  • Control board, after the connections test good
✓ One safe check you can try

1. Turn off the dryer's circuit breaker and leave it off for 5 minutes. 2. Turn the breaker back on. 3. Start a timed dry cycle. 4. Watch the dryer for one minute to ensure F1E1 does not reappear. 5. If it does, schedule service.

! Why to stop there
  • No cause is given, so a returning F1E1 means we have to test
  • We check the supply, the connections and the control
  • Because no cause is given, the first visit is about narrowing it down, not guessing
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

F2E2Maytag Dryer Code F2E2: Keypad and Control Power LocMaytag Dryer Message Loc: Locked Controls and How to Unlock F2E4Maytag Dryer Code F2E4: User Interface or Wiring PFMaytag Dryer Code PF: Power Failure in the Middle of a Cycle F2E5Maytag Dryer Code F2E5: Control Panel Communication F3 E4Maytag Dryer Code F3 E4: Sensor Circuit Needing a Reset F3E1Maytag Dryer Code F3E1: Exhaust Thermistor Out of Range F3E2Maytag Dryer Code F3E2: Moisture Data Missing for Five Loads
F1E1F1E1 questions
Is F1E1 related to F1E3 and F1E4?

They share the F1 start and all deal with the control. This one names no cause, so the reset is your only step, and we test the control circuit if the code comes back.

How long should I wait before restoring power?

The instructions call for 5 minutes with the breaker off for this code. A shorter break may not let the control restart fully, so wait the whole time before you switch the breaker on again.

Can I run the dryer if F1E1 clears?

You can, but watch for the code to return. A repeat is the signal that the control needs a proper test before something larger fails.

Book a visit

Still seeing F1E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390