Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Dryer

Maytag Dryer Code PF: Power Failure in the Middle of a Cycle

PF stands for power failure. On a Maytag electric or gas dryer with an electronic control, it means a power failure interrupted the drying cycle. The control can also show PF after an outage if it…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
PF
Appliance
Dryer
Brand
Maytag
Warranty
30-day workmanship

What PF means

PF stands for power failure. On a Maytag electric or gas dryer with an electronic control, it means a power failure interrupted the drying cycle. The control can also show PF after an outage if it detected unusual electrical noise on the supply line and read it as a wrong voltage. You will see PF on the display and the load will be damp. It is information, not a breakdown. Many Houston homes still run dryers with this older control.

Common causes of PF

  • Real power outage or brownout during the cycle
  • Electrical noise on the supply line read as a wrong voltage
  • Tripped breaker or loose plug that interrupted the dryer
  • A repeating PF with no outage, which points to the supply or the control
✓ One safe check you can try

1. Touch and hold START to restart the cycle, or press POWER to clear the display. 2. Check the breaker panel for a tripped dryer breaker and reset it once if needed. 3. Make sure the dryer plug is fully seated. 4. Run the cycle again and watch whether PF returns. 5. Clean the lint screen first.

! Why to stop there
  • If PF keeps appearing with no outage in the house, the supply or the control may be reacting to something we need to measure.
  • We test the incoming voltage at the dryer before looking at the control.
  • You get a written price before work starts, and an older dryer gets an honest repair-or-replace opinion.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

F6E2Maytag Dryer Code F6E2: Alert Needing a Five-Minute Reset F6E3Maytag Dryer Code F6E3: Control Board Alert F1E3Maytag Dryer Code F1E3: Control Unit or Wiring, Start Test F7E1Maytag Dryer Code F7E1: Drum Motor System in Trouble F1E4Maytag Dryer Code F1E4: Control Unit or Wiring, Five-minute Reset F9E2Maytag Dryer Code F9E2: Control Alert Cleared by a Reset F1E5Maytag Dryer Code F1E5: Control or Wiring, Start and Unplug Test FC E1Maytag Dryer Code FC E1: Reset for a Control Message
PFPF questions
Does PF mean the dryer is broken?

No. PF means a power failure interrupted the cycle. After a real outage, restarting the cycle or pressing POWER is usually all that is needed.

Why did PF appear when the lights stayed on?

The control can show PF if it sees electrical noise on the supply line and mistakes it for a wrong voltage. That can happen without the whole house losing power.

What should make me call for PF?

If PF returns repeatedly with no outage, or the dryer trips its breaker, call us. We test the supply at the dryer and quote any repair in writing.

Book a visit

Still unsure about PF?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390