Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Microwave

Maytag Countertop Microwave Code Flashing 0:00: Clock Reset After Power Loss

A flashing 0:00 on a Maytag countertop microwave means power was interrupted. The display shows it each time the microwave is plugged in or when electricity comes back after an outage. It is not a repair…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
Flashing 0:00
Appliance
Microwave
Brand
Maytag
Warranty
30-day workmanship

What Flashing 0:00 means

A flashing 0:00 on a Maytag countertop microwave means power was interrupted. The display shows it each time the microwave is plugged in or when electricity comes back after an outage. It is not a repair code. The clock simply lost its setting and needs to be set again, and cooking is normally available once the display is back to standby.

Common causes of Flashing 0:00

  • A power outage or brief interruption
  • The cord having been unplugged and plugged back in
  • An outlet or circuit that keeps dropping power
✓ One safe check you can try

1. Make sure the microwave is in standby with the door closed. 2. Press and hold Timer/Clock for about three seconds to enter clock setting. 3. Use the plus and minus buttons to set the hour, then press Start to confirm. 4. Continue the same way for the minutes if the display asks.

! Why to stop there
  • If 0:00 returns when no outage happened, something is cutting power to the microwave
  • We look at the cord, the outlet and the circuit before blaming the microwave
  • You get a written price first, and our repairs have a 30-day warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

FC E8 or Registration ErrorMaytag Microwave Code FC E8 or Registration Error: Setup Entry Problem Flashing Colon or PFMaytag Microwave Code Flashing Colon or PF: Power Loss Notice LOC, L or Padlock IconMaytag Microwave Code LOC, L or Padlock Icon: Control Lock On No or Partial DisplayMaytag Microwave Code No or Partial Display: Blank Control Panel SEMaytag Microwave Code SE: Keypad Wiring Check After Reset F8E5Maytag Microwave Code F8E5: Sensor in the Exhaust Air Path F9Maytag Microwave Code F9: Two Boards to Check F9Q or F9Q1Maytag Microwave Code F9Q or F9Q1: Reset and Function Failure
Flashing 0:00Flashing 0:00 questions
Is a flashing 0:00 a breakdown?

No. It tells you power was lost. Set the clock and the display returns to normal. The microwave itself is usually fine.

Why does it come back every few days?

Something is interrupting power to the microwave. It could be a loose plug, a tripping circuit or utility flickers. We can check the outlet and the cord during a visit.

Can I cook while 0:00 is flashing?

On many models you can press Start for timed cooking, but follow the owner's manual for your model. Setting the clock first keeps the display clear.

Book a visit

Still unsure about Flashing 0:00?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390