Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range Hood

Maytag Vent Hood Code F: Grease Filter Reminder

On Maytag under-cabinet and wall vent hoods with filter alarms, such as the UXT4236AYS and UXT2030ADW, an F in the display means the grease filter is due for cleaning. After 30 hours of fan operation, the…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
F
Appliance
Range Hood
Brand
Maytag
Warranty
30-day workmanship

What F means

On Maytag under-cabinet and wall vent hoods with filter alarms, such as the UXT4236AYS and UXT2030ADW, an F in the display means the grease filter is due for cleaning. After 30 hours of fan operation, the hood shows F while the fan is active. The metal filters should be washed frequently. Place them in the dishwasher or a hot detergent solution. Let them dry thoroughly before putting them back, then press and hold FAN for 3 seconds to reset the alarm.

Common causes of F

  • Grease filter alarm reached
  • Filter not reset after cleaning
✓ One safe check you can try

1. Switch off the hood and let it cool. 2. Take out the metal grease filters and wash them in the dishwasher or hot detergent solution. 3. Let them dry completely and put them back. 4. Press and hold FAN for 3 seconds to reset the alarm.

! Why to stop there
  • If F returns right after a reset, the reminder may not be clearing
  • A hood that is noisy or weak after cleaning may have a fan issue
  • Nothing starts until you have approved a written price, and we guarantee our workmanship for 30 days
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range Hood codes

CMaytag Vent Hood Code C: Charcoal Filter Reminder
FF questions
Is the F on my hood a problem with the motor?

No. It reminds you the grease filter is due for cleaning after 30 hours of fan operation. It shows while the fan is active, and it goes away when you reset it.

How often will the F appear?

Each time the fan reaches 30 hours of operation. Cleaning the filters and resetting the alarm restarts the count, so heavy cooks will see it more often than light ones.

The F stays on after cleaning. What now?

Hold FAN for 3 full seconds after the filters are dry and back in place. If it still persists, we check the hood's control and tell you what we find.

Book a visit

Still unsure about F?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390