MEDX700AG
Maytag MEDX700AG Electric Dryer Repair
Most common issues on this model
- Cycle that never seems to finish
- Thump on every turn of the drum
- Dryer that stops until the door is pushed
- Heat that is hotter than normal
The MEDX700AG is an electric Maytag dryer from the Bravos X line, with only this number listed. The AG ending is part of the identity of the unit, so we do not assume it matches a similar MEDX700 number without checking the label.
A cycle that never finishes usually means the dryer cannot tell the load is dry, or hot air is trapped by a restricted vent. A thump on every turn is a flat roller or a lumpy belt. If the dryer only runs when you push the door, we test the door switch and strike. Heat that is hotter than normal makes us stop and check the thermostats and the vent immediately.
The label carries the model and serial, which we copy before ordering so the part matches. A written price comes first, and our work is covered for 30 days.
Key features
- Maytag Bravos X line
- Electric dryer
- Single listed number: MEDX700AG
Error codes this model can show
Why does the MEDX700AG take so long to finish?
Weak airflow is the most common cause, followed by a failing heating element or a moisture-sensing issue. We measure the vent, test the heating parts and show you what we found.
Why does it only run if I push the door?
The door switch or latch strike is worn. We test the switch with a meter and check how the latch engages. It is usually a small, low-cost repair.
Is MEDX700AG the same as MEDX700X?
They share a base but may differ in revision and parts. We copy the full number from the label so we do not order for the wrong one.
Book repair for your MEDX700AG
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.