Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Dryer

Maytag Dryer Code F1E4: Control Unit or Wiring, Five-minute Reset

F1E4 on a Maytag electric or gas dryer with an electronic control, like its neighbor F1E3, indicates there may be an issue with the control unit or the associated wiring. The difference is the owner step:…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F1E4
Appliance
Dryer
Brand
Maytag
Warranty
30-day workmanship

What F1E4 means

F1E4 on a Maytag electric or gas dryer with an electronic control, like its neighbor F1E3, indicates there may be an issue with the control unit or the associated wiring. The difference is the owner step: for F1E4 the instructions call for a longer power reset at the breaker. The display shows F1E4, and the dryer may not run or finish a cycle. It is a circuit message, not a verdict on one part.

Common causes of F1E4

  • Control unit
  • Wiring to the control
  • Connection that has loosened
  • Supply interrupted at the breaker
✓ One safe check you can try

1. Turn off the dryer's circuit breaker for 5 minutes. 2. Turn the breaker back on. 3. Start a timed dry cycle. 4. Watch the dryer for 5 minutes to confirm F1E4 does not show up again. 5. If it does, schedule service.

! Why to stop there
  • A code that returns after a full reset means the control and wiring need tests
  • We check connections first, then the control itself
  • Our testing starts at the connectors, since they are the cheapest thing to rule out
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

F3E5Maytag Dryer Code F3E5: Five Loads in a Row Without Moisture Data F4E1Maytag Dryer Code F4E1: Heater System Check With Relays F6E1Maytag Dryer Code F6E1: Control Board to Touchpad Link F6E2Maytag Dryer Code F6E2: Alert Needing a Five-Minute Reset F6E3Maytag Dryer Code F6E3: Control Board Alert F7E1Maytag Dryer Code F7E1: Drum Motor System in Trouble F1E3Maytag Dryer Code F1E3: Control Unit or Wiring, Start Test F9E2Maytag Dryer Code F9E2: Control Alert Cleared by a Reset
F1E4F1E4 questions
How does F1E4 differ from F1E3?

Both point to the control or its wiring. F1E4 calls for the longer breaker reset, while F1E3 starts with holding START/PAUSE after selecting a cycle.

Does 5 minutes matter?

Yes. The instructions give 5 minutes with the breaker off and a 5-minute watch afterward. Shorter times may not give the control a chance to fully restart.

Could a loose wire cause this?

The wording includes the associated wiring, so yes. A connection that has worked loose is one thing we look for before we talk about a new control.

Book a visit

Still seeing F1E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390