Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Codes F2 E0 to F2 E6: Keypad and Control Circuit

This group, F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 and F2 E6, is used by Maytag electric and gas freestanding and slide-in ranges such as the MGR6751BDW. It points to the user interface…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6 means

This group, F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 and F2 E6, is used by Maytag electric and gas freestanding and slide-in ranges such as the MGR6751BDW. It points to the user interface or keypad, the control or the wiring between them. The control may be getting a stuck or unreadable signal from the pads. Owners may see buttons that do nothing, an oven that will not start, or a code that returns right after a reset.

Common causes of F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6

  • User interface or keypad sending a stuck or unclear signal
  • Oven control board
  • Connection between keypad and control
✓ One safe check you can try

1. Wipe the control panel dry with the range off and cool. 2. Switch the circuit breaker off for one minute, then on. 3. Monitor the oven for one minute for the code. 4. Try a brief bake before relying on the oven. 5. If a pad feels stuck or the glass is cracked, stop and let us look.

! Why to stop there
  • A stuck keypad and a bad control produce the same code, so a reset only shows whether it recurs.
  • We test the keypad and its connection first and quote in writing before replacing a board.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit
F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6 questions
Why so many E-numbers?

The control records which keypad or control check did not pass, and each check has its own number. For you they all point to the same area of the range, and a technician reads the number as a clue before testing.

Could heat or moisture near the control cause this?

Steam, spills or a damp panel can upset a keypad. Keep the panel dry and clean, but if the code repeats, the circuit needs testing.

Is the cooktop affected?

It can be, since many ranges run the cooktop through the same control as the oven. Check each burner or element carefully before you rely on them, and tell us which ones did not respond when you call.

Book a visit

Still seeing F2 E0, F2 E2, F2 E3, F2 E4, F2 E5 or F2 E6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390