Error code · Range

Maytag Range Codes F9-1 Through F9-3: Door Lock Switch

Medium · inspection needed

Code: F9-1, F9-2 or F9-3
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F9-1, F9-2 or F9-3 means

F9-1, F9-2 and F9-3 appear on Maytag electric and gas freestanding and slide-in ranges, including the MER7765WS0. They point to the oven door latch, the door lock switch or the wiring between them. The control looks for a clear locked or unlocked answer and does not get one. Owners may see a door that stays locked, a clean cycle that will not start or a bake that ends early. These hyphenated F9 codes are not the same as a plain F9, which points to wiring in the house.

Common causes of F9-1, F9-2 or F9-3

Oven door latch
Door lock switch
Latch wiring and connector
Door fit against the frame

✓ One safe check you can try

1. Let the oven cool before touching the door. 2. Close the door gently and make sure the latch area is free. 3. Turn the range's circuit breaker off for one minute and on again. 4. Check the display after a minute for a return of the code. 5. Check that the oven runs normally, and leave a stuck door alone.

! Why to stop there

Which of the three parts caused the code is not shown by the display.
We run the latch through its motion, test the switch and trace the wiring, and quote the repair in writing first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up Lock on the CooktopMaytag Range Cooktop Lock Message: Touch Controls Disabled F9 or F9 E0 (miswired outlet)Maytag Range Code F9 or F9 E0: Miswired Electrical Supply

F9-1, F9-2 or F9-3F9-1, F9-2 or F9-3 questions

Is F9-1 the same as a plain F9?

No. F9-1, F9-2 and F9-3 concern the door latch and lock switch. A plain F9 or F9 E0 points to how the range is wired at the house supply, which is a different matter.

Why does the code differ by number?

The number records which latch check did not pass. For you they share the same repair area, and we use the number as a starting clue.

What if the door will not unlock?

Let the oven cool and do not pry the door. We can free the latch and find out why it stuck without bending the door or frame.

Book a visit

Still seeing F9-1, F9-2 or F9-3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390