Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Microwave

Maytag Microwave Code FC E1, FC E2 or FC E3: Wi-Fi Connection Lost

FC E1, FC E2 and FC E3 appear on Maytag over-the-range microwaves that connect to a home network. All three mean the appliance could not connect to the router. The manufacturer lists a timed-out connection, weak…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
FC E1, FC E2 or FC E3
Appliance
Microwave
Brand
Maytag
Warranty
30-day workmanship

What FC E1, FC E2 or FC E3 means

FC E1, FC E2 and FC E3 appear on Maytag over-the-range microwaves that connect to a home network. All three mean the appliance could not connect to the router. The manufacturer lists a timed-out connection, weak signal, a router that has stopped working, the Wi-Fi module in the microwave or the wiring around it. Cooking itself usually still works, but the app link does not.

Common causes of FC E1, FC E2 or FC E3

  • Weak Wi-Fi signal where the microwave is mounted
  • The home router and its connection to the internet
  • The Wi-Fi module in the microwave
  • Wiring to the module
✓ One safe check you can try

1. Switch the microwave's circuit breaker off for one minute, then on. 2. Wait a minute and see if the code returns. 3. Restart your wireless router the way its maker describes. 4. Try connecting the microwave again from the app and verify that it works.

! Why to stop there
  • We can tell you whether the router or the microwave is the weak link only by testing both sides
  • If the microwave's own module is the issue, we check it and its wiring
  • You get a written price first, and our work has a 30-day warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

FC E7Maytag Microwave Code FC E7: Microwave Cannot Reach the Router FC E8 or Registration ErrorMaytag Microwave Code FC E8 or Registration Error: Setup Entry Problem Flashing 0:00Maytag Countertop Microwave Code Flashing 0:00: Clock Reset After Power Loss Flashing Colon or PFMaytag Microwave Code Flashing Colon or PF: Power Loss Notice LOC, L or Padlock IconMaytag Microwave Code LOC, L or Padlock Icon: Control Lock On No or Partial DisplayMaytag Microwave Code No or Partial Display: Blank Control Panel SEMaytag Microwave Code SE: Keypad Wiring Check After Reset F8E5Maytag Microwave Code F8E5: Sensor in the Exhaust Air Path
FC E1, FC E2 or FC E3FC E1, FC E2 or FC E3 questions
Is the microwave still safe to cook with when FC E1 shows?

The code is about the network connection. Many owners can keep cooking with the controls on the front. If the display also acts oddly, stop and let us check it.

Should I replace my router?

Not first. Restart it and try again, because the manufacturer lists a router problem alongside module trouble. If other devices connect fine, the microwave side deserves a test.

Can you help with an older connected Maytag microwave?

Yes. We check the unit and quote the work in writing. If the Wi-Fi feature is not worth fixing on an older microwave, we say so plainly.

Book a visit

Still unsure about FC E1, FC E2 or FC E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390