Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Code 1c1c or 1c2c: User Interface and Keypad

1c1c and 1c2c appear on Maytag electric and gas freestanding and slide-in ranges, such as the MER8650ES and MGR6751BDW. They point to the user interface or keypad, or to the wires that run to it. The…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
1c1c or 1c2c
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What 1c1c or 1c2c means

1c1c and 1c2c appear on Maytag electric and gas freestanding and slide-in ranges, such as the MER8650ES and MGR6751BDW. They point to the user interface or keypad, or to the wires that run to it. The control cannot read the keypad correctly. You will see the code, and buttons may not respond or the oven may not start. Many of these ranges are years out of warranty and still cooking daily in Houston, and we repair them.

Common causes of 1c1c or 1c2c

  • The user interface and keypad
  • Wiring between the keypad and the control
  • The control reading the keypad
✓ One safe check you can try

1. Flip the range's breaker off for a minute. 2. Flip it on again. 3. Keep the display in sight for a minute and press a key or two to see whether the pads respond. 4. If you smell gas on a gas range, leave the house and call the gas utility from outside.

! Why to stop there
  • A reset may clear it briefly, but a returning code needs a keypad and wiring test
  • We test the circuit before quoting a part
  • You get the price on paper before we start, and our labor carries a 30-day guarantee
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up F9-1, F9-2 or F9-3Maytag Range Codes F9-1 Through F9-3: Door Lock Switch Lock on the CooktopMaytag Range Cooktop Lock Message: Touch Controls Disabled
1c1c or 1c2c1c1c or 1c2c questions
Do 1c1c and 1c2c differ?

They share one description, the user interface or keypad and the wiring around it. We check the same circuit for both codes and note which one your display shows.

Can I still cook while the code shows?

If the reset clears it and the buttons respond normally, careful use is reasonable. If the keypad stays dead or the code returns, stop using the range and call us.

Is an older range worth repairing for this?

Often it is, since a keypad circuit repair costs less than a new range. After testing we put a quote on paper, and if the range is simply too tired to justify the cost, we will tell you directly.

Book a visit

Still seeing 1c1c or 1c2c?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390