Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Code F06: Electronic Control Error

F06 is a control code on Maytag electric and gas freestanding and slide-in ranges, such as the MER8850DS. It points to the electronic control or to the wiring tied to it. The control has seen something…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F06
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F06 means

F06 is a control code on Maytag electric and gas freestanding and slide-in ranges, such as the MER8850DS. It points to the electronic control or to the wiring tied to it. The control has seen something in its own circuit it does not like and has flagged it. Owners see F06 on the display and may find the oven off, a bake that stops early or buttons that do nothing. It describes where the trouble is likely to sit, not which part has failed.

Common causes of F06

  • Electronic control board
  • Wiring and connectors serving the control
  • Supply power interruption that left the control in an error state
✓ One safe check you can try

1. Turn off the oven and let it cool. 2. Turn the range's circuit breaker off and count one minute. 3. Turn the breaker on. 4. Monitor the oven for a minute to confirm F06 does not display again. 5. Verify oven operation with a short bake.

! Why to stop there
  • If F06 comes back, the reset did not remove the cause, and the control or its wiring needs direct testing.
  • We check connections before replacing a board and show you the price in writing before we start.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up F9-1, F9-2 or F9-3Maytag Range Codes F9-1 Through F9-3: Door Lock Switch
F06F06 questions
Is F06 the same as F03?

They are different codes. Both involve the control, so the first steps match, but the control logs them separately and we read that difference when we diagnose.

Can F06 clear on its own?

Sometimes a power glitch causes it and a reset clears it for good. If it repeats, treat it as a real condition and have the control and wiring tested.

Do you repair older Maytag ranges with this code?

Yes. Many ranges in Houston homes are well past their warranty. We repair them and tell you plainly when a repair is not worth the cost.

Book a visit

Still seeing F06?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390