Error code · Range

Maytag Range Codes F1-5 and F1-8: Control and Keypad Circuit

Medium · inspection needed

Code: F1-5 or F1-8
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F1-5 or F1-8 means

The hyphenated codes F1-5 and F1-8 come from Maytag electric and gas freestanding and slide-in ranges, such as the MER8650ES. They point to the oven control, the user interface or keypad, or the wiring among them. In plain words, the control is not getting clean information from the buttons or is flagging itself. Owners may find that pads do not respond, the oven does not start or a cycle ends, and the code sits in the display until power is reset.

Common causes of F1-5 or F1-8

Keypad or user interface sending an unclear signal
Oven control board
Ribbon or harness connections between keypad and control

✓ One safe check you can try

1. Make sure your hands and the control panel are dry and clean, and wipe any spills from the glass. 2. Flip the range's breaker to off and wait one minute. 3. Turn the breaker on again. 4. Check the display after one minute for the code. 5. Run a short bake to confirm the oven works.

! Why to stop there

A keypad problem and a control problem look the same from the outside, so a reset cannot separate them.
We test the keypad response and connections before suggesting a new control, and you receive the price in writing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up

F1-5 or F1-8F1-5 or F1-8 questions

Can spills cause F1-5 or F1-8?

Moisture or residue on the control panel can confuse the keypad on some ranges. Wipe it dry with the range off and cool, then try the reset. If the code persists, we test the circuit.

Which part is likely to need replacing?

We cannot say from the code alone. It may be the keypad, the control or a connection between them. Testing tells us which one, so you pay only for the part that actually needs work.

Do these codes mean the oven is unsafe?

The control stops the oven on purpose, and that is protective rather than dangerous by itself. Avoid using the oven until the code clears and a short bake cycle behaves normally from start to finish.

Book a visit

Still seeing F1-5 or F1-8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390