Error code · Range

Maytag Range Code FEE7: Broil Element Concern

Medium · inspection needed

Code: FEE7
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What FEE7 means

FEE7 belongs to the Maytag range family, both electric and gas, freestanding or slide-in, for instance the MER8850DS. It refers to the main cavity broil element and its wiring. The control checks that circuit as the oven runs, and FEE7 says the reading was not what it expected. It identifies where to look, not a part that has already failed. Typically the display shows it together with weak or missing broil heat, or an oven that stops a cycle early.

Common causes of FEE7

Broil element circuit that the control flags
Loose or damaged wiring at the element
Oven control that reads the circuit

✓ One safe check you can try

1. Shut the oven off and wait until the cavity is cool. 2. At the breaker panel, flip the breaker that feeds this range to off. Count to sixty. 3. Flip it on again. 4. Look at the display for about a minute. 5. Bake briefly, then try broil. If FEE7 shows again, do not keep using the oven.

! Why to stop there

If FEE7 returns, a reset has not removed the cause, and the element, wiring and control all stay possible.
We test the circuit in that order so you only pay for what is needed.
The price is in writing before work, and the repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode F9 or F9 E0 (miswired outlet)Maytag Range Code F9 or F9 E0: Miswired Electrical Supply FBE1, FBE2 or FEE8Maytag Range Codes FBE1, FBE2 and FEE8: Reset and Recheck FC E1, FC E2 or FC E3Maytag Range Codes FC E1, FC E2 or FC E3: Wi-Fi Connection Lost FC E4 or FC E5Maytag Range Codes FC E4 and FC E5: Wi-Fi Antenna Concern FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module

FEE7FEE7 questions

Is FEE7 the same as FEE6?

They are close neighbors. FEE6 refers to the bake element circuit and FEE7 to the broil element circuit, so they send us to different parts of the oven.

Can I still bake?

Possibly, since the code names the broil side. Still, if the oven shows other signs of trouble or the code keeps returning, stop using it until we have looked.

Will a breaker reset fix it?

It can clear a one-time glitch. If the code repeats after the reset, the circuit itself needs testing, and that is work for us rather than a reset.

Book a visit

Still seeing FEE7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390