MGR5750AD
Maytag MGR5750AD Gas Stove and Oven Repair
Most common issues on this model
- Oven door that does not close tight
- Warm air leaking around the door gasket
- Broil flame that cuts out
- Handle or hinge that sags
MGR5750AD is a Maytag gas range, and the number also turns up as MGR5750ADA, MGR5750ADQ and MGR5750ADW. Gas supplies the surface burners and the oven.
A stove like this loses a lot of oven performance when the door does not seal. We look at the gasket, the hinges, the door spring tension and the latch, since heat leaking at the front makes the oven run long and darkens the cabinet above. Door problems also change what the sensor reads.
Inside, we check the bake and broil burners, the igniter and the safety valve. Whatever part is needed, the number on your label picks it. You approve a written estimate first, and a 30-day warranty follows the work. A worn part that is not worth replacing is something we tell you about.
Key features
- Gas range made by Maytag
- Surface burners and oven fueled by gas
- You may see MGR5750ADA, MGR5750ADQ and MGR5750ADW on the label
Error codes this model can show
My oven door on the MGR5750AD will not stay shut. Can it be fixed?
Usually yes. A worn hinge, a weak spring or a loose latch is the common cause. We test each one and replace only the piece that is bad, rather than the whole door.
Does a bad gasket change how the oven bakes?
It can. Heat that leaks around the door makes the oven run longer and can throw off the temperature reading. We look for gaps in the gasket and check the oven with an independent thermometer.
The broil flame goes out partway. What do you check?
The broil burner, its igniter and the safety valve. On gas ranges of this type a tired igniter can drop out once hot. We measure current, watch the flame pattern and give you a price first.
Book repair for your MGR5750AD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.