Model library · Maytag Range

YMER8875W

Maytag YMER8875W Electric Cooktop and Oven Repair

Most common issues on this model

Only some of the burners respond
Oven heat that comes up uneven
Selector that jumps between settings
Element socket with a loose or burnt look

YMER8875W stands for a Maytag range whose cooktop and oven are both electric. Look at the end of your tag: the same number is also listed as YMER8875WB, YMER8875WS and YMER8875WW, and that last letter helps us pick the right switch or coil.

When only some burners respond, the cause is seldom the whole range. Each burner has its own switch and socket, so a meter on each one narrows the problem to a single part quickly. Houston kitchens with heavy daily use tend to wear the same two burners the most, and those sockets are where we find darkened metal.

A selector that jumps from one setting to another has a worn switch behind the knob. For the oven, uneven heat leads us to the coils and the door gasket. All parts are chosen from the exact number on the tag. We put the cost on paper first and then do the work, which is covered for 30 days.

Key features

Maytag range with electric cooktop and oven
Three listed endings: YMER8875WB, YMER8875WS, YMER8875WW
Nothing gas-fueled to service

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit

YMER8875WYMER8875W questions

Only two of my YMER8875W burners work. Is the range wiring bad?

Probably not. Each burner has its own switch and socket, so two dead burners usually mean two failed parts. We meter every one and replace only those that fail.

What makes a knob jump between settings?

A worn switch whose detents or contacts no longer hold position. Replacing the switch is a routine repair on electric ranges and restores steady heat control at each setting.

Can you tell what ending my range has?

The ending is printed on the tag, usually inside the oven frame or behind the drawer. Our technician reads it on site and checks it against parts lists before ordering.

Book a visit

Book repair for your YMER8875W

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390