Model library · Maytag Range

MGR5751AD

Maytag MGR5751AD Gas Range Repair

Most common issues on this model

Burner knob that feels stiff or loose
Gas valve that does not shut off cleanly
Knob that turns but the burner stays unlit
Spark that fires only on some positions

The MGR5751AD is a Maytag gas range. It is sold with four endings, MGR5751ADB, MGR5751ADQ and MGR5751ADS, which usually separate the finishes. Gas feeds both the cooktop and the oven.

The knobs on a range like this do two jobs at once: they open a gas valve and trigger a spark switch. When a knob feels stiff, wobbles on its stem or turns without any flame, we look at the valve stem, the switch behind it and the knob insert before blaming the burner. A valve that does not close fully is a safety item and is handled first.

We then test the burners and the oven system. Valves and switches differ between revisions, so we copy the model and serial off the data plate before buying. Pricing is given in writing before work begins. Our workmanship is guaranteed for 30 days.

Key features

Maytag gas-fueled range
Gas valves behind each burner knob
Matching numbers: MGR5751ADB, MGR5751ADQ and MGR5751ADS

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up F9-1, F9-2 or F9-3Maytag Range Codes F9-1 Through F9-3: Door Lock Switch

MGR5751ADMGR5751AD questions

My MGR5751AD knob spins freely. Is the valve bad?

Often the knob insert or stem is worn, not the valve. We pull the knob, check the stem flats and test whether the valve still opens and closes. Replacing a knob is much cheaper than a valve.

Why does a burner click in only one knob position?

The spark switch behind the knob may be worn or dirty, so it makes contact only at certain angles. We test the switch, clean it or replace it, and then confirm the flame lights across the whole turn.

Is a burner that will not shut off urgent?

Yes. Close the supply valve behind the range, ventilate the room and call us. A valve that leaks gas past its seat should be replaced rather than adjusted, and we leak-test afterward.

Book a visit

Book repair for your MGR5751AD

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390