Error code · Washer

Maytag Front-Load Washer Detergent Low Flashing: Refill the Bulk Dispenser

Low risk · DIY check OK

Code: Detergent Low
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What Detergent Low means

Detergent Low flashes on the display of a Maytag front-load HE washer with a bulk dispenser, such as the MHW8630HC, when the dispenser needs more detergent. It is a refill reminder, not a malfunction. The washer expects high-efficiency liquid detergent only, because regular detergent tends to lengthen cycles and weaken rinsing. The concentration setting on the washer also needs to match the product you pour in. You see the words blinking and the washer continues to work.

Common causes of Detergent Low

Bulk dispenser running low on detergent
Regular instead of HE detergent in the dispenser
Concentration level set for a different product

✓ One safe check you can try

1. Open the bulk dispenser and look at the detergent level. 2. Refill it with high-efficiency (HE) liquid detergent only. 3. Confirm the concentration level is adjusted to the correct setting for your detergent. 4. Close the dispenser and start a cycle. 5. Check that Detergent Low stops flashing.

! Why to stop there

If the dispenser is full and the message keeps flashing, the level sensing or the dispenser pump may need testing.
Poor rinsing after using the wrong detergent is a different matter, and we separate it from a repair.
We give you a written price before any work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem

Detergent LowDetergent Low questions

Can I use regular detergent in the bulk dispenser?

No. Use only HE liquid detergent. Regular detergent will likely result in longer cycle times and reduced rinsing performance, which can look like a washer problem.

Why is the message flashing with a full dispenser?

The level sensing may be misreading, or the concentration setting may be off. Check both first, and if it persists we can test the dispenser.

How do I set the concentration level?

Follow your owner's manual for your model. The right level depends on the detergent you pour in, and the wrong one can cause over or under dosing.

Book a visit

Still unsure about Detergent Low?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390