Error code · Washer

Maytag Top-Load Washer Code F0E8: Water Left in the Tub

Medium · inspection needed

Code: F0E8
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What F0E8 means

F0E8 appears on Maytag top-load HE washers with an electronic control, from the Bravos, Bravos X and Bravos XL era through models such as the MVWC565FW and MVWB765FW. It means the washer found too much residual water in the tub. In plain words, the water did not leave the drum the way it should, so the cycle stops with a wet load. The manufacturer's one step is to run a Drain and Spin cycle. The older Bravos models are still in many homes, and we repair them.

Common causes of F0E8

A kinked or blocked drain hose or standpipe
Lint or a small item in the drain path
The drain pump and its wiring, if the path is clear
The sensing that reads the water level

✓ One safe check you can try

1. Select a Drain and Spin cycle to remove the water. 2. Check that the drain hose behind the washer is not kinked or crushed. 3. Make sure the standpipe or sink drain is not backed up. 4. If F0E8 returns or water stays in the tub, stop and call us.

! Why to stop there

Once the house drain and hose are ruled out, the pump has to be tested under load
A level reading that is wrong can look the same as a real drain problem, so we check both
On an older Bravos, we tell you plainly if a repair is not worth the cost

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub

F0E8F0E8 questions

What does F0E8 mean?

The washer found too much water still in the tub. It could not clear it, so it stopped. The step given is to run a Drain and Spin cycle to remove the water.

Is it safe to use the washer with water in it?

Drain it first with Drain and Spin. If it will not drain, do not keep running cycles. Standing water makes a mess and can hide a real drain problem.

Will you repair an older Bravos?

Yes. We give a written price before work and say plainly if the cost does not make sense for the age of the washer. Repairs carry a 30-day warranty.

Book a visit

Still seeing F0E8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390