Error code · Washer

Maytag Washer Code F2E1: Control Message and a Power Reset

Medium · inspection needed

Code: F2E1
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What F2E1 means

F2E1 appears on Maytag front-load HE washers (MHW models such as the MHW5630HW) and Maytag top-load HE washers with an electronic control (such as the MVW6230HW), including the older Bravos, Bravos X and Bravos XL era. The manufacturer states no cause and gives a single step, a power reset of 5 minutes. On washers, F2E1 is not a documented stuck-key message, so we do not read it that way. You see the code when the cycle stops or will not begin.

Common causes of F2E1

A momentary control stop that the reset clears
The control board connections, if the code repeats after the reset
The wiring between the control and the controls you press

✓ One safe check you can try

1. Pull the plug, or switch off the breaker for the washer. 2. Wait a full 5 minutes before restoring power. 3. Start a normal cycle and watch whether the washer runs. 4. If F2E1 shows again, write down the model number and when the code appeared, then call us. Please do not open the control panel yourself.

! Why to stop there

With no cause stated, a repeat means we trace the control and its wiring ourselves
We separate a control problem from a loose connection before quoting a price
Should the washer prove to be an aging Bravos, you hear from us honestly whether fixing it makes sense

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way

F2E1F2E1 questions

What does F2E1 mean on a Maytag washer?

The manufacturer gives no cause for it. The one step listed is to disconnect power for 5 minutes and then restore it, so we treat it as a control message that needs testing if it repeats.

Is F2E1 a stuck button?

That reading belongs to another appliance. For washers, no such meaning is given, so we do not assume it. We check the control and wiring on the washer itself.

Are older Bravos washers something you service?

Yes, they are still in many homes. We quote in writing first, tell you plainly when a repair is not worth it, and back our work with a 30-day warranty.

Book a visit

Still seeing F2E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390