Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Washer Code F5E1: Door Switch Not Closing at Start

F5E1 is a door switch alert on Maytag front-load HE washers (MHW models such as the MHW5630HW) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era.…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F5E1
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F5E1 means

F5E1 is a door switch alert on Maytag front-load HE washers (MHW models such as the MHW5630HW) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era. The washer does not see the door or lid as completely closed, so it will not run. The manufacturer's checks are simple: close the door or lid fully, and make sure nothing, such as clothing or shipping material, blocks the switch.

Common causes of F5E1

  • A door or lid not fully closed
  • Clothing or shipping material blocking the switch
  • The door switch and its wiring, once the door is clear
✓ One safe check you can try

1. Open the door or lid and look for clothing or packing material near the latch and switch. 2. Close it fully until it clicks or seats. 3. Pull the plug for 5 minutes, then plug it back in. 4. Start the cycle again.

! Why to stop there
  • A door that closes cleanly but is not detected points to the switch itself, which we test
  • A worn hinge or a bent latch can keep a door from seating, so we look at the whole door
  • Age counts on a Bravos, so we compare the written price with the washer's remaining life
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing
F5E1F5E1 questions
What does F5E1 mean on my Maytag?

The washer does not detect the door or lid as fully closed. Check that nothing blocks the switch, such as clothing or leftover shipping material, and close the door firmly.

Is it the same for front-loaders and top-loaders?

Yes, both are described as a door switch alert, with the same advice on the door or lid being fully closed. A front-loader has a door and a top-loader has a lid, but the checks are the same.

What if the door is clear and it still shows?

Then the switch itself needs testing, along with the latch and the wiring that leads to it, and we do that with the washer running. We give a written price before work, and our repairs carry a 30-day warranty.

Book a visit

Still seeing F5E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390