Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Front-Load Washer Code F7E3: Reset Advised for an Unnamed Cause

F7E3 shows up on Maytag MHW front-load HE washers like the MHW3505FW and MHW6630HC. The manufacturer gives no meaning for it and asks only for a 5-minute power reset. That puts it with several other F7…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F7E3
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F7E3 means

F7E3 shows up on Maytag MHW front-load HE washers like the MHW3505FW and MHW6630HC. The manufacturer gives no meaning for it and asks only for a 5-minute power reset. That puts it with several other F7 codes on this washer that are reported without an explanation. We read it as a stop raised by the control that has to be diagnosed on the machine, not read off the display.

Common causes of F7E3

  • A temporary stop that clears with the reset
  • A wiring or connector problem that appears now and then
  • The control board, only once the connections are cleared
✓ One safe check you can try

1. Unplug the washer. 2. Wait the full 5 minutes. 3. Plug it in and run a short cycle. 4. If F7E3 is displayed again, make a note of the load size and the stage of the cycle, and call us.

! Why to stop there
  • No stated cause means the circuit has to be found by testing
  • The load size and the stage of the cycle help us narrow it down
  • Our view on repairing versus replacing an older MHW comes before any work
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed
F7E3F7E3 questions
Why does my front-load Maytag show F7E3?

The manufacturer gives no meaning for it. The one step is to disconnect power for 5 minutes and restore it, so we diagnose the washer if the code returns.

Is F7E3 related to F7E1?

Both begin with F7, but F7E1 has a stated motor speed meaning and F7E3 does not. We do not borrow one for the other.

What will you do about it?

We test the washer, give you a written price before any work, and say plainly if a repair is not worth it. Repairs have a 30-day workmanship warranty.

Book a visit

Still seeing F7E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390