Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Codes F1-A and F1-C: Door Latch and Lock Switch

When F1-A or F1-C appears on a Maytag electric or gas freestanding or slide-in range, such as the MGR6751BDW, the control suspects the oven door latch, the door lock switch or the wiring between them. It…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F1-A or F1-C
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F1-A or F1-C means

When F1-A or F1-C appears on a Maytag electric or gas freestanding or slide-in range, such as the MGR6751BDW, the control suspects the oven door latch, the door lock switch or the wiring between them. It cannot confirm that the door is where it should be, locked or unlocked. The owner sees the code, and the oven may not start a bake or self-clean, or the door may stay locked after a cycle.

Common causes of F1-A or F1-C

  • Door latch mechanism not reaching its locked or unlocked position
  • Door lock switch
  • Latch wiring or connector
  • Door alignment
✓ One safe check you can try

1. Let the oven cool fully. 2. Close the door gently and make sure nothing sits in the way of the latch. 3. Switch the breaker for the range off for one minute, then on. 4. Monitor the oven for one minute to confirm the code stays away. 5. Verify oven operation. Leave a stuck door alone.

! Why to stop there
  • The code stops short of naming whether the latch, switch or wiring is the issue.
  • We cycle the latch and test the switch, then tell you the result and quote the repair in writing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up F9-1, F9-2 or F9-3Maytag Range Codes F9-1 Through F9-3: Door Lock Switch Lock on the CooktopMaytag Range Cooktop Lock Message: Touch Controls Disabled F9 or F9 E0 (miswired outlet)Maytag Range Code F9 or F9 E0: Miswired Electrical Supply
F1-A or F1-CF1-A or F1-C questions
Is F1-A different from F1-C?

Both belong to the door latch and lock switch circuit. The final letter records which check the control made when it flagged the problem, and we use that detail as a starting clue when we test.

My door will not open. What now?

Let the oven cool completely and do not force the door, since pulling can bend the latch. If it stays locked after cooling, we release it and test the latch without damaging the door or the frame.

Can I run the oven with the door locked?

Only when the code is gone and the oven behaves normally through a full short bake. If the lock signal is unreliable, the control may stop a cycle at any point, including in the middle of a meal.

Book a visit

Still seeing F1-A or F1-C?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390