Error code · Range

Maytag Range Codes F1 E7 and F1 E9: Appliance Control Board

Medium · inspection needed

Code: F1 E7 or F1 E9
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F1 E7 or F1 E9 means

F1 E7 and F1 E9 are error codes on Maytag electric and gas freestanding and slide-in ranges, such as the MER8850DS, and they point toward the appliance control board and its wiring. This is the main board that coordinates the oven functions. When it reports a problem with itself or its connections, the oven may stop heating, refuse a cycle or show nothing but the code. A power reset sometimes brings it back, though a returning code means the cause remains.

Common causes of F1 E7 or F1 E9

Appliance control board
Wiring between the board and the oven parts
Power disturbance at the range

✓ One safe check you can try

1. Turn off the oven and make sure it is cool. 2. Switch the circuit breaker off for one minute. 3. Restore the breaker. 4. Monitor the oven for one minute to confirm the code does not show again. 5. Verify oven operation. Do not open the back or side panels.

! Why to stop there

The board and its wiring cannot be told apart from the display alone, and resetting does not test either.
We check the connections and then the board output, and explain the finding before quoting a repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys

F1 E7 or F1 E9F1 E7 or F1 E9 questions

Does F1 E7 always mean a bad board?

No. The code points to the board and its wiring together. A loose or corroded connector can produce the same message, which is why we test the connections and the board output before we replace anything.

Is F1 E9 more serious than F1 E7?

They are treated alike from the owner's side. Both lead to the board and its wiring, and neither one tells us the exact part, so we find it by testing the circuit and reading what the control reports.

What if the code clears after the reset?

Watch the range for a few days and note when it cooks normally. If the code returns, call us, since a repeating code usually has a real cause behind it that a reset cannot remove.

Book a visit

Still seeing F1 E7 or F1 E9?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390