Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Codes F6 E1 or F6 E3: Appliance Manager Link

F6 E1 and F6 E3 are shown by Maytag electric and gas freestanding and slide-in ranges, such as the MER7765WS0. They indicate a possible problem with the appliance manager, the board that coordinates the oven functions,…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F6 E1 or F6 E3
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F6 E1 or F6 E3 means

F6 E1 and F6 E3 are shown by Maytag electric and gas freestanding and slide-in ranges, such as the MER7765WS0. They indicate a possible problem with the appliance manager, the board that coordinates the oven functions, or the wiring to it. There are several reasons this can happen, so the code is a starting point. Owners may see the oven stop, the keypad go quiet or the display show only the code until power is reset.

Common causes of F6 E1 or F6 E3

  • Appliance manager board
  • Wiring or connector to the appliance manager
  • Power disturbance that interrupted the board
✓ One safe check you can try

1. Start with the oven off and cool. 2. Shut off the range's breaker for one minute. 3. Turn the breaker on. 4. Give it a minute and see whether the code comes back. 5. Verify oven operation. If you smell burning, switch the breaker off and call us.

! Why to stop there
  • The code gives us a board and its wiring, but not the reason the board stopped responding.
  • We trace the supply and connections first, then check the board, and quote in writing before replacing it.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot
F6 E1 or F6 E3F6 E1 or F6 E3 questions
Why does the code say there are different reasons?

The appliance manager can stop responding for many reasons, from a loose plug to a power event. That is why we test before blaming the board.

Is F6 E3 worse than F6 E1?

No. The two are treated as the same group and need the same tests. The last digit helps a technician but does not change your first steps.

Is a burning smell connected?

It could be, since an electrical issue can overheat a connector. If you smell burning, switch the range off at the breaker and call us rather than testing it again.

Book a visit

Still seeing F6 E1 or F6 E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390