Error code · Microwave

Maytag Microwave Code F9Q or F9Q1: Reset and Function Failure

Medium · inspection needed

Code: F9Q or F9Q1
Appliance: Microwave
Brand: Maytag
Warranty: 30-day workmanship

What F9Q or F9Q1 means

F9Q and F9Q1 are two related codes on Maytag over-the-range microwave and hood combinations. For F9Q the manufacturer gives no named cause and only a power reset. F9Q1 means the oven could not execute the function. In both cases the display shows the code, and the microwave may stop mid-cycle or not start at all. Reading the display carefully, F9Q versus F9Q1, helps us when you call.

Common causes of F9Q or F9Q1

Control response to a power interruption
Connections between the control and the loads it switches
Control board behavior if the code returns after a reset

✓ One safe check you can try

1. Turn the circuit breaker for the microwave off for one minute. 2. Turn it back on. 3. Watch the display for a minute to see if F9Q or F9Q1 reappears. 4. Verify oven operation with a short cycle. 5. If either code returns, write down which one you saw.

! Why to stop there

With no named part from the manufacturer, a repeat of the code is our cue to test the control and its connections
We measure before we replace, and we say when a code looks like a one-time event
You approve the written price before work begins

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

F8E5Maytag Microwave Code F8E5: Sensor in the Exhaust Air Path F9Maytag Microwave Code F9: Two Boards to Check FC E1, FC E2 or FC E3Maytag Microwave Code FC E1, FC E2 or FC E3: Wi-Fi Connection Lost FC E7Maytag Microwave Code FC E7: Microwave Cannot Reach the Router FC E8 or Registration ErrorMaytag Microwave Code FC E8 or Registration Error: Setup Entry Problem Flashing 0:00Maytag Countertop Microwave Code Flashing 0:00: Clock Reset After Power Loss Flashing Colon or PFMaytag Microwave Code Flashing Colon or PF: Power Loss Notice LOC, L or Padlock IconMaytag Microwave Code LOC, L or Padlock Icon: Control Lock On

F9Q or F9Q1F9Q or F9Q1 questions

What is the difference between F9Q and F9Q1?

F9Q has no stated cause beyond a power reset. F9Q1 says the oven could not execute its function. Both get the same first step, the breaker reset.

Does F9Q mean the microwave is ruined?

No. A code that clears after a reset may never come back. If it repeats, we test the control and its wiring rather than guess at a part.

Will you look at an older over-the-range Maytag with F9Q1?

Yes. We repair microwaves that are past warranty, write the price down first and say plainly if a repair is not worth it.

Book a visit

Still seeing F9Q or F9Q1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390