Error code · Wall Oven

Maytag Steam Wall Oven Message Temperature Reached Insert Food: Preheat Done

Low risk · DIY check OK

Code: Temperature Reached Insert Food
Appliance: Wall Oven
Brand: Maytag
Warranty: 30-day workmanship

What Temperature Reached Insert Food means

Temperature Reached Insert Food is a message on Maytag wall ovens with a steam or boiler function, such as the MEW9530FZ and MEW9627FZ. It is not an error. It means the preheat cycle finished and the oven has reached the temperature you chose. The oven is waiting for you. Open the door, put the food in, close the door, and restart the cycle or press START. It is simply the oven telling you it is ready.

Common causes of Temperature Reached Insert Food

Preheat finished and the oven is waiting for you
Door switch not registering a closed door after you add the food

✓ One safe check you can try

1. Open the oven door once the message appears. 2. Place the food in the oven as your recipe requires. 3. Close the door fully. 4. Restart the cycle or press START, and the oven carries on from where it paused.

! Why to stop there

There is nothing to repair if the message is the only thing you see
If the oven will not continue after you press START, the door switch or control may need a look
You get the cost in writing ahead of time, with 30 days of workmanship warranty behind the repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F8 E3Maytag Wall Oven Code F8 E3: Oven Cooling Fan, Wiring and Control F8 E4, F8 E5Maytag Wall Oven Codes F8 E4 and F8 E5: Exhaust Fan Air Temperature Sensor F9 or F9 E0Maytag Wall Oven Code F9 or F9 E0: Supply Wiring Polarity Code shown as "F" and a number, beeping (older wall ovens)Maytag Older Wall Oven Code F With a Number and Beeping: Cancel, Then Power Down FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router

Temperature Reached Insert FoodTemperature Reached Insert Food questions

Is Temperature Reached Insert Food an error?

No. It is a prompt that the preheat cycle is done and the oven is at the temperature you chose. Add your food and press START to continue the cycle.

Why does the oven stop and wait for me?

The cycle is designed to pause once the temperature is reached so that food goes in at the right moment. It continues as soon as you close the door and restart it.

What if START does nothing after I add the food?

Make sure the door is closed all the way. If the oven still will not continue, call us and we test the door switch and the control before we quote anything.

Book a visit

Still unsure about Temperature Reached Insert Food?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390