Error code · Wall Oven

Maytag Wall Oven Message Probe or Insert Probe: Meat Probe Not Detected

Probe or Insert Probe on a Maytag built-in wall oven means the control is looking for a signal from the meat probe and not finding one. This happens when you start a probe cycle without the…

Low risk · DIY check OK

Book a House Call (713) 936-6390

Code: Probe or Insert Probe on a Wall Oven
Appliance: Wall Oven
Brand: Maytag
Warranty: 30-day workmanship

What Probe or Insert Probe on a Wall Oven means

Probe or Insert Probe on a Maytag built-in wall oven means the control is looking for a signal from the meat probe and not finding one. This happens when you start a probe cycle without the probe fully seated in its jack, or without the probe in the food. Check the plug is pushed in all the way, and insert the probe into the center of the thickest part of the food. With bone-in meat, keep the tip away from the bone, as that can give poor results.

Common causes of Probe or Insert Probe on a Wall Oven

Probe not fully seated in the jack
Probe not inserted in the food
Probe cord or tip damaged

✓ One safe check you can try

1. Push the probe plug firmly into the jack. 2. Insert the probe into the center of the thickest part of the food. 3. Keep the tip away from bone if cooking bone-in meat. 4. Start the probe cycle again.

! Why to stop there

If the message returns with the probe seated, the jack or its wiring may be the problem
A worn probe can mimic a bad jack, so we test both
Expect a written quote before any work, then a 30-day warranty on the labor we do

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router FC E8Maytag Wall Oven Code FC E8: Entering the SAID Number at Setup Flashing Time, Clock, 12:00, Power Loss or Enter TimeMaytag Wall Oven Display Flashing Time, 12:00 or Power Loss: Set the Clock Locked, Lock or Loc on a Wall OvenMaytag Wall Oven Display Locked, Lock or Loc: Controls and Door Locked Please Remove and Empty ContainerMaytag Steam Wall Oven Message Please Remove and Empty Container: Drain Finished Registration ErrorMaytag Wall Oven Message Registration Error: Connection Needed Temperature Reached Insert FoodMaytag Steam Wall Oven Message Temperature Reached Insert Food: Preheat Done

Probe or Insert Probe on a Wall OvenProbe or Insert Probe on a Wall Oven questions

Why does my oven ask for the probe?

The probe cycle needs a signal from the probe, and without one the control prompts you. Seat the plug fully in its jack, and place the probe tip in the food.

Does it matter where the probe goes in the meat?

Yes. Aim for the center of the thickest or fleshiest part of the food. A tip too close to bone may give unfavorable cooking results, so keep it clear of bone.

The jack looks fine but the oven still prompts me.

The probe cord or the jack wiring may be worn, which a quick look cannot show. We test both parts of the circuit and tell you which one needs work before we quote.

Book a visit

Still unsure about Probe or Insert Probe on a Wall Oven?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390