Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Codes 9d11 to 9d62: Door Lock Circuit

The codes from 9d11 through 9d62 appear on Maytag electric and gas freestanding and slide-in ranges, including the MGR6751BDW. They point to the oven door latch assembly, the door switch or the wiring that connects them.…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
9d11 to 9d62
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What 9d11 to 9d62 means

The codes from 9d11 through 9d62 appear on Maytag electric and gas freestanding and slide-in ranges, including the MGR6751BDW. They point to the oven door latch assembly, the door switch or the wiring that connects them. The control expects the latch to lock and unlock on command and the switch to confirm it. When that does not happen, the oven posts the code. Owners usually find the door stuck, a self-clean cycle that will not start, or a bake that stops.

Common causes of 9d11 to 9d62

  • Latch assembly that does not lock or unlock on command
  • Door switch that does not confirm door position
  • Wiring between the latch, switch and control
  • Door alignment preventing a clean latch
✓ One safe check you can try

1. Let the oven cool completely before trying the door. 2. Close the door squarely and clear anything from its edge. 3. Turn the circuit breaker for the range off for one minute, then on again. 4. Monitor the oven for one minute to see whether the code returns. 5. Verify oven operation without forcing the door.

! Why to stop there
  • The code range does not say whether the latch, the switch or the wiring is responsible.
  • We run the latch through its motion and test the switch, then show you the result and quote the repair before work starts.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit
9d11 to 9d629d11 to 9d62 questions
Why is my oven door stuck after a self-clean?

The latch keeps the door locked until the control confirms the oven is cool. If the latch circuit reports something unexpected, the door can stay locked and show one of these codes.

Is there a trick to forcing the door open?

We do not recommend forcing it. Pulling on a locked door can bend the latch and enlarge the repair. Wait for the oven to cool and call us if it stays shut.

Why such a long list of codes?

Each number marks which latch check did not pass, such as lock, unlock or position. For you it all means the same area, and the detail helps us decide where to start testing.

Book a visit

Still seeing 9d11 to 9d62?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390