Error code · Range

Maytag Range BAKE or LOCK Flashing: Older Control Alert

Medium · inspection needed

Code: BAKE or LOCK flashing rapidly in the display (older electronic-control ranges)
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What BAKE or LOCK flashing rapidly in the display (older electronic-control ranges) means

This is an older Maytag electric or gas range with an electronic oven control, the style found in guides for models like the MER5775RAW, AGS1740 and JW9633. When the word BAKE or LOCK flashes rapidly in the display, the control is telling you it found an error or problem. These are older ranges, still in many Houston homes, and we repair them. The flashing may come with an oven that will not heat or a door that will not unlock.

Common causes of BAKE or LOCK flashing rapidly in the display (older electronic-control ranges)

Oven control that detected an error during a cycle
Door lock or latch circuit on the older control
Wiring or connectors that have aged

✓ One safe check you can try

1. Press CANCEL to clear the display. 2. If BAKE or LOCK keeps flashing, disconnect power to the range and wait a few minutes. 3. Reconnect power and watch the display. 4. If the flashing continues, disconnect power again and leave the oven off until it is checked.

! Why to stop there

The flashing alert does not tell which circuit raised the error, so a clear after a reset does not prove it is gone.
On an older range we check parts availability and say plainly when a repair is not worth the money.
You get the price in writing before we start.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start FC E4 or FC E5Maytag Range Codes FC E4 and FC E5: Wi-Fi Antenna Concern FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted

BAKE or LOCK flashing rapidly in the display (older electronic-control ranges)BAKE or LOCK flashing rapidly in the display (older electronic-control ranges) questions

Is my older range worth repairing?

Often yes, if the problem is a latch, wiring or a control that is still available. We tell you plainly when parts cost makes a repair a poor choice.

What does it mean when BAKE flashes?

The control found an error and is asking for attention. Pressing CANCEL clears the alert, and if it keeps flashing the range needs power disconnected for a few minutes, then a check.

Is LOCK flashing different?

It is the same type of alert tied to the lock side of the control. The steps are the same: press CANCEL, then disconnect and reconnect power if it persists.

Book a visit

Still seeing BAKE or LOCK flashing rapidly in the display (older electronic-control ranges)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390