Error code · Range

Maytag Range F3 E4 Code: Meat Probe Not Detected

Low risk · DIY check OK

Code: F3 E4
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F3 E4 means

On Maytag electric and gas ranges with a meat probe, such as the MER7662WS0, F3 E4 is a prompt about the probe connection. The control wants the probe plugged securely into its receptacle and does not see it that way. Where the receptacle sits depends on the model. Owners usually see the code when they start a probe cook, or occasionally when the oven starts with no probe in use, and the cycle may not begin.

Common causes of F3 E4

Probe not pushed fully into the receptacle
Worn probe cable or plug
Receptacle or wiring with a weak contact
Control input for the probe

✓ One safe check you can try

1. Wait until the oven is cool, then press the meat probe firmly into its receptacle. Your guide shows where it sits on your model. 2. If you do not need the probe, take it out. 3. Turn off the breaker for one minute and turn it back on. 4. Monitor the oven for one minute. 5. Verify oven operation.

! Why to stop there

If the code appears even with a seated probe, the plug, the receptacle or the control input is the next suspect.
We test with a known good probe and look at the receptacle, so a working part is not replaced by mistake.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit

F3 E4F3 E4 questions

Can I bake without the probe?

Yes. Remove the probe from the oven so the control stops looking for it, then bake as usual. The code should not come back unless something else is wrong.

Is F3 E4 the same as F8?

Both concern the meat probe connection, but they appear on different control styles. Read the full code on your display and mention it when you call.

What if a new probe still shows the code?

Then the problem is in the receptacle, its wiring or the control, not the probe. That is the case where a visit makes sense, and we explain the price before work.

Book a visit

Still unsure about F3 E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390