Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Code F6: Oven Control and Wiring Check

F6 is a code on Maytag electric and gas freestanding and slide-in ranges, such as the MER7662WS0, that points to the oven control or the wiring that serves it. The control has flagged something in its…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F6
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F6 means

F6 is a code on Maytag electric and gas freestanding and slide-in ranges, such as the MER7662WS0, that points to the oven control or the wiring that serves it. The control has flagged something in its own circuit. Owners see F6 on the display along with an oven that may not start, a bake that ends early or keypad pads that seem dead. Unlike its longer relatives, F6 on its own carries no extra characters to narrow things down.

Common causes of F6

  • Oven control board
  • Wiring harness and connectors
  • Power supply upset at the range
✓ One safe check you can try

1. Shut the oven off and wait for it to cool. 2. Cut the power at the breaker for one minute. 3. Turn the breaker on. 4. Monitor the oven for one minute to ensure the code does not display again. 5. Verify oven operation with a short test bake.

! Why to stop there
  • A returning F6 leaves both the control and its wiring in question, and a reset tests neither.
  • We inspect connectors first and then check the control, and you see the written price before we order any part.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot
F6F6 questions
How is F6 different from F6 E1?

F6 on its own concerns the oven control and wiring. F6 E1 and F6 E3 point to the appliance manager, a different board in the system, so the full code matters.

Does F6 mean the main board is gone?

Not necessarily. It names the control area, and a loose connection can look the same as a bad board. We test before we recommend a replacement.

Do power outages cause F6?

They can. A surge or a brief loss of power can leave the control in an error state, and a reset sometimes clears it. A repeat means the cause is still present.

Book a visit

Still seeing F6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390