Error code · Range

Maytag Range Codes F7 E0 and F7 E1: Latch or Door Switch

Medium · inspection needed

Code: F7 E0 or F7 E1
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F7 E0 or F7 E1 means

Maytag electric and gas freestanding and slide-in ranges, such as the MGR6751BDW, split this pair by part. F7 E0 points to the oven door latch assembly or its wiring. F7 E1 points to the door switch or its wiring. In both cases the control cannot confirm whether the door is closed and locked as it expects. Owners may see a bake that will not start, a clean cycle that stops or a door that stays locked after heating.

Common causes of F7 E0 or F7 E1

Oven door latch assembly (F7 E0)
Door switch (F7 E1)
Wiring to the latch or switch
Door seating against the frame

✓ One safe check you can try

1. Let the oven cool fully, then close the door squarely. 2. Clear anything from the door edge and the latch area. 3. Turn the range's breaker off for one minute, then on. 4. Monitor the oven for one minute to see if your code returns. 5. Verify oven operation. Never force a locked door.

! Why to stop there

The code splits the latch from the switch, but a reset cannot tell us whether a mechanism or a wire is the weak point in that circuit.
We test the specific part the code names and its wiring, then quote the repair in writing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up F9-1, F9-2 or F9-3Maytag Range Codes F9-1 Through F9-3: Door Lock Switch Lock on the CooktopMaytag Range Cooktop Lock Message: Touch Controls Disabled F9 or F9 E0 (miswired outlet)Maytag Range Code F9 or F9 E0: Miswired Electrical Supply

F7 E0 or F7 E1F7 E0 or F7 E1 questions

Which code is which part?

F7 E0 points toward the latch assembly and F7 E1 toward the door switch. Both include the wiring, and we test the named part first and then the connections.

Do I need a new door?

No. The door itself is rarely the issue. A worn latch, a switch or a wire is much more likely, and each of those can be tested and replaced without changing the door.

Why did it start after self-clean?

Cleaning puts the heaviest load on the latch and switch. If one is weak, the stress of a clean cycle can expose it, and the code appears afterward.

Book a visit

Still seeing F7 E0 or F7 E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390