Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Range

Maytag Range Codes F7 E5, F7 E6, F8 E0 and F8 E2: Cooling Fan Circuit

This group on Maytag electric and gas freestanding and slide-in ranges, such as the MER7662WS0, deals with the oven cooling fan. F7 E5 and F7 E6 point to the cooling fan or its wiring. F8 E0…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F7 E5, F7 E6, F8 E0 or F8 E2
Appliance
Range
Brand
Maytag
Warranty
30-day workmanship

What F7 E5, F7 E6, F8 E0 or F8 E2 means

This group on Maytag electric and gas freestanding and slide-in ranges, such as the MER7662WS0, deals with the oven cooling fan. F7 E5 and F7 E6 point to the cooling fan or its wiring. F8 E0 says the fan speed is too low, from restricted airflow, the fan or its wiring. F8 E2 says the speed is too high, from the fan or its wiring. Owners hear a fan that is weak, loud or silent, and the oven may stop heating.

Common causes of F7 E5, F7 E6, F8 E0 or F8 E2

  • Airflow restriction at the vent or intake (F8 E0)
  • Cooling fan motor speed
  • Fan wiring and connector
  • Control reading the fan signal
✓ One safe check you can try

1. Oven off, then wait until it is cool. 2. Check that nothing blocks the oven vent or the space around the range. 3. Turn off the circuit breaker for one minute and on again. 4. Wait a minute and watch for the code. 5. Verify oven operation. Stop if the fan scrapes or buzzes.

! Why to stop there
  • A clear vent helps only the too-low code, and a fan that still misbehaves must be tested directly.
  • We check the fan, its wiring and its speed signal, and you see the written price before we replace any part.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit
F7 E5, F7 E6, F8 E0 or F8 E2F7 E5, F7 E6, F8 E0 or F8 E2 questions
What separates F8 E0 from F8 E2?

F8 E0 reports a fan that is too slow, which can be airflow or the motor. F8 E2 reports one that is too fast, which points to the fan or its wiring instead.

Why does the oven need a cooling fan?

The fan carries heat away from the control and the surrounding cabinet. If it stops or misbehaves, the control may shut the heating down to protect itself.

Can I run the oven for short periods?

We suggest holding off until the fan is checked. Short bakes are less risky than long ones, but heat can still build around the control.

Book a visit

Still seeing F7 E5, F7 E6, F8 E0 or F8 E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390