Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Washer Code F6E3: Second Reboot Alert Reading on Display

An F6E3 on a Maytag top-load HE washer with an electronic control, from the Bravos era to models like the MVW6230HW, is another washer reboot alert. The manufacturer's reading is that the control unit, the user…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F6E3
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F6E3 means

An F6E3 on a Maytag top-load HE washer with an electronic control, from the Bravos era to models like the MVW6230HW, is another washer reboot alert. The manufacturer's reading is that the control unit, the user interface or the wiring between them may have a problem. On Maytag front-load HE washers (MHW models such as the MHW8630HC), nothing is stated beyond a 5-minute power reset. The display shows the code after the washer stalls or resets itself.

Common causes of F6E3

  • The control unit, if it keeps restarting
  • The user interface or its harness
  • A power supply interruption at the outlet or cord
  • A one-time event on a front-loader
✓ One safe check you can try

1. Unplug the washer. 2. Wait 5 minutes. 3. Plug it in again and look at whether the display lights normally. 4. Run a short cycle. If F6E3 comes back, leave the washer unplugged, do not open the console, and call us with the model number and what the display did before the code appeared.

! Why to stop there
  • We need to see whether the washer resets itself under load or while idle
  • The wiring behind the console cannot be judged by looking at the outside
  • A straight opinion on whether this older Bravos deserves the repair comes with every price we give
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load
F6E3F6E3 questions
What separates F6E3 from F6E2?

On top-loaders both are reboot alerts with the same named areas: the control unit, the user interface and the wiring. We do not separate them by the display alone.

What should I do first?

Unplug the washer for 5 minutes, then plug it back in. That is the listed step on both washer types. If the code returns, the control path needs a professional test, because the cause sits behind the console where an owner cannot see it.

Will the repair be worth it?

We give a written price first and say plainly when an older washer is not worth fixing. Our work comes with a 30-day warranty.

Book a visit

Still seeing F6E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390