Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Front-Load Washer Code FC E0: Reset Is the Only Listed Step

A Maytag HE front-loader such as the MHW3505FW or MHW8630HC can stop and display FC E0. Nothing is published about its cause, and the only advice given is to reset the power, so this page will…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
FC E0
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What FC E0 means

A Maytag HE front-loader such as the MHW3505FW or MHW8630HC can stop and display FC E0. Nothing is published about its cause, and the only advice given is to reset the power, so this page will not pretend to know more. It behaves like a control-level stop: the cycle halts and the code stays on the display until power has been cycled. Anything beyond that needs the washer tested by someone who can watch how it behaves.

Common causes of FC E0

  • A temporary control glitch that clears with a power reset
  • Loose or damaged wiring between the control and the rest of the washer
  • The control board, after the other checks are done
✓ One safe check you can try

1. Cut power to the washer by pulling the plug or tripping its breaker. 2. Let 5 minutes pass. 3. Switch power back on and start a short cycle. 4. If water is held in the drum, give the washer time to release the door on its own. 5. When FC E0 shows again, stop using the washer and write down what it was doing.

! Why to stop there
  • When FC E0 comes back after a reset, the cause is lasting and the code cannot say what it is
  • We test the control and the wiring behind it before suggesting any part
  • These older front-loaders are still in many homes; we repair them and tell you plainly when a repair is not worth it
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing
FC E0FC E0 questions
What does FC E0 mean on a Maytag front-loader?

No cause is published for it. The only step listed is a five-minute power reset, so it is best treated as a general control stop that needs testing if it keeps returning.

Is FC related to Wi-Fi on this washer?

For washers, no Wi-Fi meaning is documented for this code. Do not assume a connectivity problem; try the power reset and see whether the washer finishes a cycle.

How do I know if it is worth repairing?

After testing we tell you what we found and what the repair costs, in writing, before any work starts. If the cost is not sensible for the washer, we say so. Repairs carry a 30-day workmanship warranty.

Book a visit

Still seeing FC E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390