Error code · Washer

Maytag Front-Load Washer Code Int: Cycle Paused or Canceled, Still Draining

Low risk · DIY check OK

Code: Int
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What Int means

Int is shown on Maytag front-load HE washers, such as the MHW6630HC or MHW8630HC, after a cycle has been paused or canceled. It does not mean something is broken. The washer needs time to stop spinning and to drain, which can take 20 to 30 minutes, and the code stays on the display for that whole stretch. Think of it as the washer saying it is winding down, so the door stays locked for a while after you press the button.

Common causes of Int

A cycle canceled or paused from the keypad, which the washer has to wind down from
Water and spin that need 20 to 30 minutes to finish stopping
A display that holds Int long after the drum has stopped, if the control is not clearing it

✓ One safe check you can try

1. Be patient; give the washer 20 to 30 minutes to stop spinning and drain. 2. To remove the code, press the Pause or Cancel button twice. 3. Then press the Power button once. 4. The exact method varies by model, so try the other keys if nothing happens. 5. If the display stays stuck, unplug the washer for 5 minutes.

! Why to stop there

A code that never clears after a long wait and a power reset needs the control tested
If the door stays locked with the drum standing still, the lock and drain circuits get checked
You get the price in writing first, and we say plainly if an older MHW is not worth repairing

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash

IntInt questions

Does Int mean my washer is broken?

No. It means the cycle was paused or canceled, and the washer needs 20 to 30 minutes to stop spinning and drain. The code stays on the display during that time and then should clear.

How do I clear Int?

Press Pause or Cancel twice, then press Power once. The method varies by model, so the exact keys can differ on yours; the sequence is the usual starting point.

When should I call you?

If Int stays after the wait, a reset and the door will not release. We test the lock and control, quote in writing, and warrant repairs for 30 days.

Book a visit

Still unsure about Int?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390