Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Front-Load Washer Message “No Water Detected”: Fill Not Registering

The message No Water Detected appears on Maytag front-load HE washers, such as the MHW6630HC and MHW8630HC. It is another way for the washer to say what F8 E1 and Lo FL say: the control is…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
No Water Detected
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What No Water Detected means

The message No Water Detected appears on Maytag front-load HE washers, such as the MHW6630HC and MHW8630HC. It is another way for the washer to say what F8 E1 and Lo FL say: the control is not detecting the correct amount of incoming water. While the message is up, the door may be locked and the control may seem unresponsive, which is why owners often think the washer has died when it is only waiting.

Common causes of No Water Detected

  • Taps closed or only partly open
  • Kinked or crushed inlet hoses
  • Clogged screens at the hose connections
  • The water level sensing or inlet valves, if the supply is fine
✓ One safe check you can try

1. Press the power button. The washer begins a drain routine of approximately 8 to 10 minutes, and the pump runs continuously through it. 2. Wait for the routine to finish before touching the door. 3. Check that both taps are open and the inlet hoses are not kinked. 4. Start the cycle again.

! Why to stop there
  • When the supply is good and the message returns, the sensing or valve circuit needs a test
  • A locked door with no response needs the power cycled and the washer examined
  • The price is in writing before we start, and we say plainly if an older MHW is not worth repairing
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way
No Water DetectedNo Water Detected questions
Is No Water Detected the same as F8 E1?

It describes the same condition. F8 E1, Lo FL and No Water Detected all mean the washer is not detecting the right amount of incoming water.

Why will the door not open?

With this message the door may stay locked and the control may not respond. Press power, and the washer runs a drain routine of about 8 to 10 minutes first.

When do I need a technician?

When the taps and hoses are fine and the message keeps coming back. We test the fill path, quote in writing, and warrant repairs for 30 days.

Book a visit

Still seeing No Water Detected?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390