Model library · Maytag Range

MET8776B

Maytag MET8776B Electric Range Repair

Most common issues on this model

Surface element that stays cold or cycles oddly
Oven that bakes lighter or darker than the dial
Broil element that glows in only one spot
Selector knob that answers late

If your stove carries the tag MET8776B, you own an electric Maytag range: the cooktop and the oven draw on electricity alone, with no pilot and no gas line to inspect. Shops list the number with other endings too, namely MET8776BB, MET8776BS and MET8776BW.

In Houston these ranges usually sit between two cabinet runs, fed by a thick cord that plugs into a dedicated wall receptacle. We start at that cord and the terminal block behind the range, since a loose or scorched connection can look just like a dead element. Then a meter goes on every surface element, the bake element and the oven sensor.

The full number on the data plate decides which switch or control we order, since endings can change the fit. You will have our estimate on paper before we pick up a tool, and the finished repair is covered for thirty days.

Key features

Maytag electric range
Electric power only, no gas line
Also sold as MET8776BB, MET8776BS and MET8776BW

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time

MET8776BMET8776B questions

My MET8776B has one cold surface element. Should I replace the range?

No. A single cold element usually means the element, its socket or its switch has failed. A meter tells us which, and replacing that one part costs far less than a new range.

Does the MET8776BB, BS or BW ending change the repair?

The ending normally marks the finish, though revisions can differ in small parts. We write down the complete number from the plate so the switch, element or sensor we order fits your range.

The oven of my electric range burns the bottom of the food. What do you check?

The bake element gets a hot-spot test, then we compare the oven sensor with a separate thermometer and look at the control that cycles the element. Uneven heat often traces to one of those three parts.

Book a visit

Book repair for your MET8776B

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390