Model library · Maytag Range

MFES7030SZ

Maytag MFES7030SZ Electric Range Repair

Most common issues on this model

Element that cycles on and off too soon
Oven bake that varies between uses
Door that does not close squarely
Control touch that sometimes does not register

Cooking on a MFES7030SZ, a Maytag range, is electric from the surface to the oven floor. The repair path therefore runs through power, elements, switches and oven controls.

We often see ranges like this in Houston homes where the kitchen was remodeled around them, so access can be tight. We slide the range out carefully, look at the cord and the wall receptacle, then work through the cooktop elements and the oven. An oven that bakes unevenly gets a sensor check, an element test and a look at the door hinges and gasket.

A touch that does not register is checked at the control and its connectors before we suggest replacement. Every order starts from the number on the data plate. You see the price on paper first, and our work is guaranteed for thirty days.

Key features

Maytag electric range
Cooktop and oven heated only by electricity
Single number listed: MFES7030SZ

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm

MFES7030SZMFES7030SZ questions

The oven on my MFES7030SZ bakes unevenly. Where do you start?

We confirm real oven heat with a thermometer, then test the sensor and the bake element, and look at the door seal. Uneven baking on electric ranges commonly comes from one of those.

Why would a control touch only work sometimes?

Worn contacts or a loose connector are common. We inspect the connectors and test the control before proposing a replacement. A control that works only after a tap often has a connection that needs to be reseated, which is a small repair.

Do tight cabinet openings make this repair harder?

Slightly, since we must slide the range out to reach the cord and the back. We do that carefully and protect your floor. Having the cabinet opening clear and the floor free of obstacles helps the visit go quickly.

Book a visit

Book repair for your MFES7030SZ

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390