MGR1320AD
Maytag MGR1320AD Gas Range Repair
Most common issues on this model
- Burner flame that looks weak
- Oven that takes long to reach temperature
- Igniter that glows but gas never flows
- Knob that feels stiff
You will find MGR1320AD on the plate of a Maytag gas range, and a sister listing exists under MGR1320ADA and MGR1320ADW. Burners on top and the oven below all run on gas.
In Houston a range like this sits on a flex line that screws to a valve in the wall, so we begin with a leak check at that joint. When the oven is slow to reach temperature, we look at whether the igniter glows brightly, whether the safety valve opens, and what the flame looks like. A glowing igniter with no gas flow is a classic sign of a weak igniter.
A stiff knob can mean a dried-out valve stem, which we check before suggesting a valve. We copy the full number from the data plate for the parts order. A written price comes first, and we back the work for thirty days.
Key features
- Maytag gas range
- Gas cooktop and gas oven
- Also listed as MGR1320ADA and MGR1320ADW
Error codes this model can show
My MGR1320AD igniter glows but the oven never lights. Why?
The igniter may be too weak to open the safety valve. We measure its current, and a new igniter often brings the oven back. Replacing it is a routine repair, and we test the oven through a full heating cycle afterward.
Is MGR1320ADA the same range as MGR1320AD?
It is the same family with a different ending, likely a finish. Parts mostly match, but we confirm with your data plate. If your plate shows a different ending, tell us when you call and we will note it on the order.
Why is a burner knob hard to turn?
Gas valve stems can dry out or gather grease. We clean and lubricate where possible and replace the valve if it binds or leaks. Never force a stuck knob, since that can break the stem and leave the burner stuck on.
Book repair for your MGR1320AD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.