MGR5752BD
Maytag MGR5752BD Gas Oven Repair
Most common issues on this model
- Oven temperature that differs from the display
- Sensor resistance outside range
- Food done too early or too late
- Preheat that ends before the oven is hot
Your MGR5752BD is a Maytag gas range, found with the endings MGR5752BDB, MGR5752BDQ and MGR5752BDS. For many owners the main complaint is that the oven does not match the temperature they set.
On a gas oven of this type, the control reads a temperature sensor and cycles the burner on and off. If the sensor drifts, the control thinks the oven is hotter or cooler than it really is. We place a separate thermometer in the oven, run a full cycle and compare the readings. Then we measure the sensor with a meter and look at the burner flame.
A drifting sensor costs far less than a new range. We read the data plate before buying one, put the estimate in writing, and guarantee the workmanship for 30 days.
Key features
- Gas range, Maytag brand
- Gas oven that cycles by temperature sensor
- The label may end in MGR5752BDB, MGR5752BDQ and MGR5752BDS
Error codes this model can show
My MGR5752BD preheat beeps but the oven is cool. Why?
The sensor may be reading wrong, so the control thinks the oven reached temperature. We check it against a thermometer and a meter and replace the sensor if its resistance is off.
Can I recalibrate the oven myself?
Some controls allow a small offset adjustment, but it only hides a failing sensor. We test the sensor and the burner first, and then set the offset only if the oven is otherwise healthy.
How do you check gas oven accuracy?
We place a separate thermometer on the center rack, run the oven at 350 degrees, and log readings through several burner cycles. That shows whether the sensor, the burner or the door seal is the problem.
Book repair for your MGR5752BD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.