MGR5754QD
Maytag MGR5754QD Gas Cooktop and Oven Repair
Most common issues on this model
- Low flame that goes out when set to simmer
- Flame that lifts off the port on high
- Burner that pops when lit
- Knob position that gives no low setting
The MGR5754QD is a Maytag gas range, also listed as MGR5754QDQ, MGR5754QDS and MGR5754QDW. Gas runs both the burners and the oven.
Owners of ranges like this often tell us that a pot will not hold a simmer: the flame goes out at the lowest setting or pops as it lights. On a gas burner of this type the cause is usually a partly blocked port, a cap that sits off center, or a low-flame setting that needs cleaning. The air supply and the gas pressure at the burner are checked together.
We clean the head, reseat the cap, test each position of the knob and watch the flame at low and high. Which valve or cap fits depends on the model and serial on the data plate, so we read those first. An estimate on paper comes before the work. The labor warranty lasts 30 days.
Key features
- Maytag range using gas
- Gas burners with low and high settings
- Same range with the suffixes MGR5754QDQ, MGR5754QDS and MGR5754QDW
Error codes this model can show
My MGR5754QD flame goes out on low. What do you check?
We check for a blocked port, a cap that is not seated and the valve's low-flame passage. Cleaning the head and cap often fixes it. If the valve is worn, we replace only that valve.
Why does a burner pop when it lights?
A pop means gas built up briefly before the spark caught it. A damp electrode, a crooked cap or a clogged port is the usual reason. We clean, dry and realign the burner and test the ignition.
Is a flame that lifts off the burner normal?
No. A flame that lifts away from the ports suggests too much gas or air or a blocked port nearby. We inspect the burner, clean it and check that the mix is correct.
Book repair for your MGR5754QD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.