MGR5780BD
Maytag MGR5780BD Gas Range Repair
Most common issues on this model
- Burners that keep clicking after they light
- Spark switch that stays damp after a boil-over
- Ticking from the cooktop when idle
- Module that sparks at all burners at once
The MGR5780BD is a Maytag gas range, available with the endings MGR5780BDB, MGR5780BDQ and MGR5780BDS. The cooktop and the oven use gas.
A cooktop that ticks nonstop, or clicks at every burner when you turn on just one, is a spark system problem rather than a gas problem. A boil-over can soak a spark switch or an electrode, and the moisture keeps the circuit closed. We dry and clean the switches, inspect the electrodes and wiring, and test the module.
Because the tick can also come from a stuck switch under a knob, we check each knob position. Once the spark behaves, we run the burners and the oven. Switches and modules are ordered only after the data plate is read. You get the estimate in writing, and the workmanship is guaranteed for 30 days.
Key features
- Maytag range, gas model
- Spark-lit gas cooktop with a gas oven
- Listed in other finishes: MGR5780BDB, MGR5780BDQ and MGR5780BDS
Error codes this model can show
My MGR5780BD keeps clicking even after the burner lights. Why?
The spark switch under the knob may be wet, dirty or stuck, so the module keeps firing. We dry or replace the switch and check the electrode, then watch the burner light and the clicking stop.
Why do all burners click when I turn on one?
The module often sparks all electrodes together on this type of range. If they keep clicking after the flame is lit, a damp or stuck switch is likely, and we test them one by one.
Is constant ticking harmful?
The spark alone is not dangerous, but it can wear the module and signals moisture. Turn the range off at the breaker if it ticks while idle, and call us to find the wet or stuck switch.
Book repair for your MGR5780BD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.