Model library · Maytag Range

MGR8800HK

Maytag MGR8800HK Gas Stove Repair

Most common issues on this model

Oven that does not light after a power outage
Burner that lights but cannot hold a simmer
Spark clicking with no flame at the burner
Odor of gas after the range has been idle

The MGR8800HK is a Maytag gas range sold as a single number. We know the fuel and the type but not its size or oven layout, so we confirm those on the unit and from the label.

Calls on this kind of stove often follow a power outage, a move or a long period when the kitchen was not used. After an outage we check whether the oven igniter has power and whether the control is responding. A burner that lights but cannot hold a simmer points us to the low-flame port. If you notice an odor of gas after the range has been idle, shut the valve and call us, because we test the connector, the joints and the burner valves with a leak solution. An ignition that clicks with no flame sends us to the burner head and the valve.

We give a written price before any repair and a 30-day warranty on our workmanship. Before parts are ordered, the full model and serial are copied from the rating plate.

Key features

Maytag gas range
Gas fuel
Not sold in other finishes under this number

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time

MGR8800HKMGR8800HK questions

Why will my oven not light after a power outage?

Gas ovens of this type need electricity for the igniter and the control. After an outage we check for power, a reset control and then the igniter and valve.

What should I do if I smell gas after being away?

Do not turn on lights or use flames. Open a window, close the range's gas valve, leave the room and call us so we can test the connector and valves.

My burner clicks but there is no flame. Is the valve bad?

Not always. A burner head packed with residue or a damp electrode can stop the flame. We clean first and test the valve only if the burner still fails to light.

Book a visit

Book repair for your MGR8800HK

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390