MGT8820DS
Maytag MGT8820DS Gas Range Repair
Most common issues on this model
- Surface burner that lights unevenly
- Oven that overheats then cools
- Flame that sputters during preheat
- Selector or knob that feels loose
The number MGT8820DS belongs to a Maytag gas range. Both the cooktop and the oven use gas, and the S ending is part of the listed number itself rather than a variant we know of.
Houston kitchens see ranges pulled out for floor or cabinet work, so we start by checking that the connector is not kinked, the shutoff opens fully, and the range is anchored. Then we test every burner, clean the ports, and watch the oven preheat. An oven that overheats then cools usually points to the sensor or a valve that sticks, and we test both.
The tag on the range is where we read the number and serial, because it is the only dependable guide to the right part. You will have the estimate on paper before work starts, and workmanship is covered for 30 days.
Key features
- Maytag gas range
- Burners and oven on gas
- No color endings listed for MGT8820DS
Error codes this model can show
My MGT8820DS oven overheats and then cools off. Why?
The sensor may report the wrong heat or the valve may stick open. We test the sensor against a separate thermometer and watch the valve through a cycle.
The flame sputters on my MGT8820DS during preheat. What do you check?
We check the burner tube for debris, the air shutter, and the gas connector. A sputter often comes from a partial blockage that a cleaning clears.
Why does a knob on my MGT8820DS wobble?
A little looseness can come from a worn stem or switch after years of use. The switch is tested and swapped only if it fails, since a poor contact can affect ignition too.
Book repair for your MGT8820DS
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.