Model library · Maytag Range

YMET8885X

Maytag YMET8885X Electric Range Repair

Most common issues on this model

Burner that heats unevenly around its ring
Oven that bakes fine but broils poorly
Control that beeps without starting the oven
Cord strain relief that has worked loose

YMET8885X is the number for a Maytag electric range, and it is also found with the endings YMET8885XB, YMET8885XS and YMET8885XW. Each of those lists as a different finish or revision, so the last letter is worth noting.

An oven that bakes but broils poorly separates the two heating paths for us: the lower coil works and the upper one does not, so we test the broil coil and its wiring without touching the bake side. A control that beeps and does not start often needs a look at the probe circuit. A cord strain relief that has worked loose can pull on the terminals, so we secure it.

For a burner heating unevenly around its ring, we measure the element for a break and the socket for carbon. We read the full tag before ordering. Written estimate first; thirty days of coverage on the finished job.

Key features

Maytag electric range
Sold as YMET8885XB, YMET8885XS and YMET8885XW too
No gas parts: heated by electric elements

→Codes

Error codes this model can show

PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected FC E1, FC E2 or FC E3Maytag Range Codes FC E1, FC E2 or FC E3: Wi-Fi Connection Lost FC E4 or FC E5Maytag Range Codes FC E4 and FC E5: Wi-Fi Antenna Concern FC E6 or FC E9Maytag Range Codes FC E6 and FC E9: Wi-Fi Power Module FC E7Maytag Range Code FC E7: No Link to Home Router FC E8Maytag Range Code FC E8: App Registration Error

YMET8885XYMET8885X questions

My YMET8885X bakes well but does not broil. Why?

The two coils are separate. If baking works, the lower coil and its supply are fine, and the upper broil coil or its wiring has failed. We test only that path and replace the failed part.

The control beeps but the oven never starts. What do you check?

We check power to the control and the probe circuit, since an open probe can stop the oven from starting. If those are fine, we test the relay that feeds the coils.

Why does a loose cord strain relief matter?

It lets the cord pull on the terminals every time the range moves, which loosens the connection and can overheat it. We secure the cord and inspect the terminals.

Book a visit

Book repair for your YMET8885X

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390