Model library · Maytag Microwave

MMV5220FZ

Maytag MMV5220FZ Over-The-Range Microwave Repair

Most common issues on this model

Cooking cycle that leaves food cool
Exhaust fan slow on one of its speeds
Keypad not accepting presses
Glass tray stuck or noisy

The MMV5220FZ is a Maytag over-the-range microwave. The base number is also listed with the suffix MMV5220FB, so your label may read slightly differently from this page. It mounts under the cabinet above a range and handles the cooktop exhaust as well as cooking.

When a customer reports no heat, we start with the door switches and the fuse, then move to the high-voltage parts. If the issue is airflow, we check the filters, the fan speeds and the exhaust path, since a closed damper or a crushed duct can mimic a weak motor. A noisy turntable usually means a dirty roller ring or a worn coupler.

Before we order a part we read the whole label and compare it with the number on this page. You get a written price first, and our repair carries a 30-day workmanship warranty.

Key features

Maytag microwave for mounting above the range
Exhaust fan with several speeds, ducted or recirculating
Lamps lighting the cooktop below
Glass turntable with a drive motor under the floor

→Codes

Error codes this model can show

F8E5Maytag Microwave Code F8E5: Sensor in the Exhaust Air Path F9Maytag Microwave Code F9: Two Boards to Check F9Q or F9Q1Maytag Microwave Code F9Q or F9Q1: Reset and Function Failure FC E1, FC E2 or FC E3Maytag Microwave Code FC E1, FC E2 or FC E3: Wi-Fi Connection Lost FC E7Maytag Microwave Code FC E7: Microwave Cannot Reach the Router FC E8 or Registration ErrorMaytag Microwave Code FC E8 or Registration Error: Setup Entry Problem Flashing 0:00Maytag Countertop Microwave Code Flashing 0:00: Clock Reset After Power Loss Flashing Colon or PFMaytag Microwave Code Flashing Colon or PF: Power Loss Notice

MMV5220FZMMV5220FZ questions

What does a closed damper do on a ducted microwave hood?

It blocks the exhaust path, so the fan seems weak even when the motor is fine. We check that the damper opens freely and that the duct to the outside is clear before replacing the fan motor.

Can the turntable noise be fixed without a new motor?

Often yes. Debris under the glass tray or a worn roller ring causes most of the rumble. We clean and inspect those before the motor, and replace parts only when the test shows they are bad.

Does the suffix on MMV5220FZ affect parts?

Sometimes. Color or revision letters can change a trim piece or a board. We read the full label and match the part to your exact number before we order it.

Book a visit

Book repair for your MMV5220FZ

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390