Error code · Washer

Maytag Washer Code F1E2: Repeating Stop Until the Power Is Reset

Medium · inspection needed

Code: F1E2
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What F1E2 means

F1E2 is a control message on Maytag front-load HE washers (MHW models such as the MHW8630HC) and Maytag top-load HE washers (such as the MVWC565FW), from the Bravos era onward. No meaning is stated for it in the manufacturer's guidance. It lists one action only: power the washer off for 5 minutes and turn it on again. Think of it as the washer reporting that its control stopped the cycle, without telling us which circuit was involved.

Common causes of F1E2

A brief control interruption that clears after the reset
A loose or worn connection to the control, if the code repeats
The control board, only after the connections and supply checks

✓ One safe check you can try

1. Disconnect power by pulling the plug. 2. Leave it off for 5 minutes. 3. Plug it back in and run the washer through a cycle. 4. If F1E2 reappears, leave the washer off and call us with the model number.

! Why to stop there

Without a stated cause, a repeat needs testing, not guessing at a part
We check the power supply to the washer and the connections inside the control path
When the Bravos is on its last legs, we advise against spending on it

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way

F1E2F1E2 questions

Is F1E2 a serious code?

It is hard to rank, because no cause is given. If it clears after a power reset and stays away, there is little to do. If it returns, the control needs a proper check.

Does it differ between front-loaders and top-loaders?

The guidance is the same for both: no stated meaning and a 5-minute power reset. What we check afterward depends on your model and on when in the cycle the code appears, so tell us that.

Should I replace the washer?

Not automatically. We look at it first, tell you plainly if the repair is not worth it on an older Bravos or MHW, and quote in writing before any work.

Book a visit

Still seeing F1E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390