Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Washer Code F5E4: Lid Still Open at the Start

F5E4 has two readings. On Maytag front-load HE washers (MHW models such as the MHW3505FW), it means the washer ran three cycles in a row without the door being opened, and opening and closing the door…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
F5E4
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F5E4 means

F5E4 has two readings. On Maytag front-load HE washers (MHW models such as the MHW3505FW), it means the washer ran three cycles in a row without the door being opened, and opening and closing the door clears it. On Maytag top-load HE washers with an electronic control (such as the MVW6230HW), including the older Bravos era, the label is Door Lid Open: the washer does not see the lid as closed.

Common causes of F5E4

  • Three consecutive cycles without the door opening (front-loaders)
  • A lid that is open or not seated (top-loaders)
  • The door or lid switch, if the code returns after opening and closing
✓ One safe check you can try

1. On a front-loader, open the door, close it, and restart the cycle. 2. On a top-loader, check that the lid is shut, then open and close it once. 3. Unplug the washer for 5 minutes and restore power if the code stays. 4. If it still returns, call us.

! Why to stop there
  • If opening and closing does not clear it, the switch that reads the door or lid needs a test
  • We check the hinge and lid alignment too
  • Older Bravos owners get our candid view on repair versus replacement
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub
F5E4F5E4 questions
Why does my front-loader show F5E4?

It has run three consecutive cycles without the door being opened. Open and close the door and restart the cycle, and the code should clear.

What does it mean on a top-loader?

The label is Door Lid Open, so the washer does not see the lid as closed. Open and close the lid, and call us if the problem persists.

Why does it need the door opened between cycles?

The listed step is simply to open and close the door. If that does not clear F5E4, we test the door switch. You get a written price first, with a 30-day warranty.

Book a visit

Still unsure about F5E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390